PVC windows and their manufacture in the Nizhny Novgorod region
Modern home, whether it's city apartment or suburban apartments, it is impossible to imagine without high-quality windows. For over 50 years of Europe's best engineers are working to improve this seemingly simple and ordinary interior details, like a window. In fact, the manufacturer of PVC windows - technically complicated process. This applies not only to labor in their manufacture, and design features of their devices.
The window is almost always located in the extreme conditions. The windows have to withstand the aggressive external environment - frost, heat, rain, snow and wind, preventing the deterioration of its functional properties and a decrease in lifetime of PVC windows .
Modern technology of windows completely give them long-term safety and allow the plastic windows for many years without repair to maintain comfort indoors.
Frame window systems are manufactured from polivinirhlorida (PVC) - High solid hydrocarbon. It is distinguished chemical resistance, resistance to fire. Thanks to the good performance and affordable for consumers the cost of manufacturing of PVC windows is widespread in Europe, particularly in Germany where the share accounted for 50% glazing window systems made of plastic.
In terms of the plastic profile is a somewhat isolated from each other compartments (chambers) filled with air. The more cameras the better the insulating properties of the profile. Currently, the most common manufacturer of windows of three-, four-and five-chamber plastic profiles. To give the necessary rigidity of the window is the largest chamber reinforced steel liner. The thickness of the window frames ranging from 48 to 150 mm.
A major role in heat insulation and sound insulation plastic window seals play. This thin corrugated gum, which put outside the window frame. In the manufacture of PVC windows use two seals - inside and out.
Processability of PVC material gives the possibility of producing not only rectangular windows, but the arch, lancet, round shape.
The design of window units must be capable of replacing windows, glass, fittings, sealing gasket without breaking the details of products.
